So, finally got my hands on a Micronta 3001 the other day. It even works!
Problem is, I can find the strainer, but not the potato masher.
Anyone have a line on one of those things? You’d think a simple stamped masher would be super easy to find..
So, finally got my hands on a Micronta 3001 the other day. It even works!
Problem is, I can find the strainer, but not the potato masher.
Anyone have a line on one of those things? You’d think a simple stamped masher would be super easy to find..
Wife wanted <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto goggles</a>, and I didn’t feel like giving up my Matty’s.
Picked up a set of Spirit goggles and went about modifying them to look like GB 2goggles.
First up, disassembly. The lenses are glued in on an inner indexing ring, but the outer ring isn’t glued. Twisting the lenses off with a …
Wife wanted <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto goggles</a>, and I didn’t feel like giving up my Matty’s.
Picked up a set of Spirit goggles and went about modifying them to look like GB 2goggles.
First up, disassembly. The lenses are glued in on an inner indexing ring, but the outer ring isn’t glued. Twisting the lenses off with a …
At it again - this time a Full-Size Clippard for the Spirit pack. Includes easy-to-use cutting jig!
We start here - your puny molded-in Clippard.
[image]
Then, install the cutting jig, and cut off everything above it!
[image]
You should have this at the end. I used a Dremel cut-off wheel. Don’t…
At it again - this time a Full-Size Clippard for the Spirit pack. Includes easy-to-use cutting jig!
We start here - your puny molded-in Clippard.
[image]
Then, install the cutting jig, and cut off everything above it!
[image]
You should have this at the end. I used a Dremel cut-off wheel. Don’t…
Found some inspiration, decided to make a few new parts. A <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a> mount, both V-Hook parts, and a full Guntrack for the Spirit wand. Because of the peg on the bottom of the wand, I also made a slip-on cutting jig for the peg.
First up: Cutting Jig. Pretty simple stuff. Slip on, cut, slip off. Note:…
Found some inspiration, decided to make a few new parts. A <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a> mount, both V-Hook parts, and a full Guntrack for the Spirit wand. Because of the peg on the bottom of the wand, I also made a slip-on cutting jig for the peg.
First up: Cutting Jig. Pretty simple stuff. Slip on, cut, slip off. Note:…
Posting this up before I forget.
<a class="lightbox" href="https://discdn.gbfans.com/original/3X/0/5/05e1a697d7a1bc59f6c882c5a88b64e52d687315.jpeg" data-download-href="/uploads/short-url/Q1Qc7Ku6YZ1rVbgIG7pY81Mwv3.jpeg?dl=1" title="image">[image]</a>
So far, I’ve designed filler/backing plates for the Clippard, speaker, and <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a>. I’ve also designed a <a href="https://www.gbfans.com/wiki/equipment/proton-pack/power-cell" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="power cell" data-autolink-id="1276">power cell</a> lens, and slide-in loom clamps.
Files are here: <a href="https://www.thingiverse.com/thing:2563427" class="inline-onebox" rel="noopener nofollow ugc">Spirit Halloween Proton Pack Mod Parts by WindDrake - Thingiverse</a>
Here’s some pictures of w…
Posting this up before I forget.
<a class="lightbox" href="https://discdn.gbfans.com/original/3X/0/5/05e1a697d7a1bc59f6c882c5a88b64e52d687315.jpeg" data-download-href="/uploads/short-url/Q1Qc7Ku6YZ1rVbgIG7pY81Mwv3.jpeg?dl=1" title="image">[image]</a>
So far, I’ve designed filler/backing plates for the Clippard, speaker, and <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a>. I’ve also designed a <a href="https://www.gbfans.com/wiki/equipment/proton-pack/power-cell" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="power cell" data-autolink-id="1276">power cell</a> lens, and slide-in loom clamps.
Files are here: <a href="https://www.thingiverse.com/thing:2563427" class="inline-onebox" rel="noopener nofollow ugc">Spirit Halloween Proton Pack Mod Parts by WindDrake - Thingiverse</a>
Here’s some pictures of w…
Sign in to post on WindDrake's wall.
Started a forum topic: Building a KUD Meter
So, finally got my hands on a Micronta 3001 the other day. It even works! Problem is, I can find the strainer, but not the potato masher. Anyone have a line on one of those things? You’d think a simple stamped masher would be super easy to find..
Read moreStarted a forum topic: Building a KUD Meter
So, finally got my hands on a Micronta 3001 the other day. It even works! Problem is, I can find the strainer, but not the potato masher. Anyone have a line on one of those things? You’d think a simple stamped masher would be super easy to find..
Read moreStarted a forum topic: Ghostbusters 2 Ecto Goggles from Spirit Halloween Goggles (3D Printed Upgrades)
Wife wanted <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto goggles</a>, and I didn’t feel like giving up my Matty’s. Picked up a set of Spirit goggles and went about modifying them to look like GB 2goggles. First up, disassembly. The lenses are glued in on an inner indexing ring, but the outer ring isn’t glued. Twisting the lenses off with a …
Read moreStarted a forum topic: Ghostbusters 2 Ecto Goggles from Spirit Halloween Goggles (3D Printed Upgrades)
Wife wanted <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">Ecto goggles</a>, and I didn’t feel like giving up my Matty’s. Picked up a set of Spirit goggles and went about modifying them to look like GB 2goggles. First up, disassembly. The lenses are glued in on an inner indexing ring, but the outer ring isn’t glued. Twisting the lenses off with a …
Read moreStarted a forum topic: Spirit Pack Parts: Full Size Clippard Valve
At it again - this time a Full-Size Clippard for the Spirit pack. Includes easy-to-use cutting jig! We start here - your puny molded-in Clippard. [image] Then, install the cutting jig, and cut off everything above it! [image] You should have this at the end. I used a Dremel cut-off wheel. Don’t…
Read moreStarted a forum topic: Spirit Pack Parts: Full Size Clippard Valve
At it again - this time a Full-Size Clippard for the Spirit pack. Includes easy-to-use cutting jig! We start here - your puny molded-in Clippard. [image] Then, install the cutting jig, and cut off everything above it! [image] You should have this at the end. I used a Dremel cut-off wheel. Don’t…
Read moreStarted a forum topic: Spirit Pack Parts: Guntrack, V-Hooks, and V-Hook Mount (3D Printed)
Found some inspiration, decided to make a few new parts. A <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a> mount, both V-Hook parts, and a full Guntrack for the Spirit wand. Because of the peg on the bottom of the wand, I also made a slip-on cutting jig for the peg. First up: Cutting Jig. Pretty simple stuff. Slip on, cut, slip off. Note:…
Read moreStarted a forum topic: Spirit Pack Parts: Guntrack, V-Hooks, and V-Hook Mount (3D Printed)
Found some inspiration, decided to make a few new parts. A <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a> mount, both V-Hook parts, and a full Guntrack for the Spirit wand. Because of the peg on the bottom of the wand, I also made a slip-on cutting jig for the peg. First up: Cutting Jig. Pretty simple stuff. Slip on, cut, slip off. Note:…
Read moreStarted a forum topic: WindDrake's 3D Printed Spirit Proton Pack Mod Files (and Build)
Posting this up before I forget. <a class="lightbox" href="https://discdn.gbfans.com/original/3X/0/5/05e1a697d7a1bc59f6c882c5a88b64e52d687315.jpeg" data-download-href="/uploads/short-url/Q1Qc7Ku6YZ1rVbgIG7pY81Mwv3.jpeg?dl=1" title="image">[image]</a> So far, I’ve designed filler/backing plates for the Clippard, speaker, and <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a>. I’ve also designed a <a href="https://www.gbfans.com/wiki/equipment/proton-pack/power-cell" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="power cell" data-autolink-id="1276">power cell</a> lens, and slide-in loom clamps. Files are here: <a href="https://www.thingiverse.com/thing:2563427" class="inline-onebox" rel="noopener nofollow ugc">Spirit Halloween Proton Pack Mod Parts by WindDrake - Thingiverse</a> Here’s some pictures of w…
Read moreStarted a forum topic: WindDrake's 3D Printed Spirit Proton Pack Mod Files (and Build)
Posting this up before I forget. <a class="lightbox" href="https://discdn.gbfans.com/original/3X/0/5/05e1a697d7a1bc59f6c882c5a88b64e52d687315.jpeg" data-download-href="/uploads/short-url/Q1Qc7Ku6YZ1rVbgIG7pY81Mwv3.jpeg?dl=1" title="image">[image]</a> So far, I’ve designed filler/backing plates for the Clippard, speaker, and <a href="https://www.gbfans.com/wiki/equipment/proton-pack/v-hook" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="v-hook" data-autolink-id="1908">V-Hook</a>. I’ve also designed a <a href="https://www.gbfans.com/wiki/equipment/proton-pack/power-cell" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="power cell" data-autolink-id="1276">power cell</a> lens, and slide-in loom clamps. Files are here: <a href="https://www.thingiverse.com/thing:2563427" class="inline-onebox" rel="noopener nofollow ugc">Spirit Halloween Proton Pack Mod Parts by WindDrake - Thingiverse</a> Here’s some pictures of w…
Read more