Hammond Project Boxes

Hammond Project Boxes are found on the Ghost Trap Pedal on the sides for mostly aesthetic purposes. In real life, these boxes could be used for different electronic projects, tests and purposes for holding electronics. For purpose on the pedal, these boxes will either have sockets or wires extruding out of them for purposes that are only known for purposeful looks.Aluminum 1590A BoxThe large project boxes used on the Ghost Trap's pedal is part #1590A and is made by Hammond Manufacturing. The 1590A is a cast aluminum box that is shorter and longer then the other .The Foster #B22-2 is mounted on the end of this box as well as the banjo fitting (on top) and straight fitting on the opposite end. Its dimensions measure: 3.64" X 1.52" X 1.06". Plastic 1591L BoxThe project boxes used on the Ghost Trap's pedal is part #1591L-SBK and is also made by Hammond Manufacturing. This one is available in either Polystyrene, or ABS Plastic, and is the box which the Relay and octal socket sits on top of. The 20 pin ribbon cable is also attached to this box by its connector. There is also a trap light lens on the top next to the relay. Its dimensions are: 3.3" X 2.2" X 1.4".