Dale Resistors

The Dale name has meant excellence in passive components for many decades. Vishay Dale products include a broad line of resistors, resistor and resistor/capacitor networks, resistor arrays, inductors, magnetics, connectors, thermistors, crystal oscillators, and panel displays. Products include both commercial and military-grade devices, and an extensive offering of both surface-mount and leaded configurations. Vishay Dale Power Metal Strip® resistors have a unique technology that makes possible low resistance values, high stability, low inductance and good power handling characteristics. Vishay Dale magnetics include a broad offering of leaded and surface-mount inductors, and transformers. Recent additions include several series of low-profile, high-current power inductors for use in DC/DC converters as energy storage inductors and high-current filter inductors. Also available are Vishay Dale custom-designed magnetic components.RH-50These are the longer resistors on the Ion Arm of the Proton Pack.They are made by Dale. These resistors are easy to find at surplus stores. They were made in a large quantities in the 70's and 80's. There are slight cosmetic variations of the RH-50 depending on when and where it was manufactured. Any version is technically accurate as they are all found on various different packs. For Ghostbusters 2, resin copies of the RH-50 were made and used on Ion Arms for packs created specifically for the film. The addition of Clippard #11752 Hose Barbs in place of the original metal leads are a tell for spotting the resin copies.PH-25These are the round resistors on the Ion Arm on the Proton Pack. They were made by Dale and from what we have unearthed, they are no longer available. These resistors are easy to find at surplus stores however, and were manufacturered in huge quantities in the 70's and 80's. They are mounted by drilling a hole, and simply epoxying them into the ion arm. Some packs have the expoxy oozing out around it, and others have it mounted cleanly. You can remove the gold nut, and use that to hold it from the backside if you are able to.