I have identified the Drone Trap remote. It is a Saitex PX2500 controller for the Playstation 2. There’s is also the PX1500 that appears to be externally identical other than it is all black instead of two-tone.
[image]
[image]
[image]
[image]
I posted this around a few groups on Facebook today, but wanted to put the info here as well.
The radios used in Frozen Empire are Baofeng UV-5R with the extended battery. Yellow and black tape has been added in different configurations depending on whose radio it is.
[image]
[image]
[image]
Th…
Now that footage of the new packs is out, I can post the parts I have I.D.ed from them.
[image]
What you’re looking at here is a modern ITT Cannon connector and a section of gas mask hose
The hose is most likely Russian. Fabric covered. The Russian hoses do come in green, but I could only find gr…
The Latent Image Sensor is the prop Venkman can be seen holding briefly during the montage in Ghostbusters 2(it’s also been featured in numerous other films and TV shows over the years).
[image]
I ended up running across a piece of it by chance. The main frame/handle is off of a Sperry X-Ray Viewi…
I’ve positively I.D.ed the tires/wheels on the new Afterlife RTV. Amazon link provided below!
[image]
[image]
[image]
[image]
<a href="https://www.amazon.com/Goolsky-AX-3011-Monster-Beadlock-TRAXXAS/dp/B06XS6V7T9/ref=sr_1_1?dchild=1&keywords=goolsky+austar+ax-3011&qid=1627529017&sr=8-1" class="onebox" target="_blank" rel="noopener">https://www.amazon.com/Goolsky-AX-3011-Monster-Beadlock-TRAXXAS/dp/B06XS6V7T9/ref=sr_1_1?dchild=1&keywords=goolsky+austar+ax-3011&qid=1627529017&sr=8-1</a>
Some of you may remember my previous build thread from about a year ago that I asked to be removed.
I finished my pack not long after that. Here’s some recent photos:
[image]
[image]
[image]
Got it pretty close! I have already gone and made a few adjustments to it since the official photo drop…
I have been meaning to post this for a while, just keep forgetting.
I have I.D.ed Phoebe’s red shoes she wears with her gray overalls.
[image]
<a href="https://billyfootwear.com/products/womens-billy-classic-lace-high-red-white-canvas-zip?variant=14833661870115" class="onebox" target="_blank" rel="noopener">https://billyfootwear.com/products/womens-billy-classic-lace-high-red-white-canvas-zip?variant=14833661870115</a>
[image]
For those of you that don’t know, I started a Holtzmann builders group on Facebook a month or so ago. I and others have identified a lot of her stuff, so I figured it was time to post it over here.
First up, her lab coat:
[image]
It is manufactured by BDG, “Rugged Indigo Duster”. Sold through Urb…
Seeing if anyone would be interested in resin casts of the shin guards for the remake suits. They will be cast in Soooth-On 65D Semi Rigid resin with black pigment.
[image]
Price is $40 + $12.65 USPS Priority Shipping in the US. International orders, please PM for shipping rates.
I’ll start with …
Sign in to post on austin's wall.
Started a forum topic: Drone Trap remote identified
I have identified the Drone Trap remote. It is a Saitex PX2500 controller for the Playstation 2. There’s is also the PX1500 that appears to be externally identical other than it is all black instead of two-tone. [image] [image] [image] [image]
Read moreStarted a forum topic: Frozen Empire Radios
I posted this around a few groups on Facebook today, but wanted to put the info here as well. The radios used in Frozen Empire are Baofeng UV-5R with the extended battery. Yellow and black tape has been added in different configurations depending on whose radio it is. [image] [image] [image] Th…
Read moreSign in to reply.
Started a forum topic: Frozen Empire Proton Pack Parts List
Now that footage of the new packs is out, I can post the parts I have I.D.ed from them. [image] What you’re looking at here is a modern ITT Cannon connector and a section of gas mask hose The hose is most likely Russian. Fabric covered. The Russian hoses do come in green, but I could only find gr…
Read moreStarted a forum topic: Latent Image Sensor Part Identified
The Latent Image Sensor is the prop Venkman can be seen holding briefly during the montage in Ghostbusters 2(it’s also been featured in numerous other films and TV shows over the years). [image] I ended up running across a piece of it by chance. The main frame/handle is off of a Sperry X-Ray Viewi…
Read moreStarted a forum topic: Afterlife R.T.V.(Remote Trap Vehicle) Tires/Wheels I.D.ed
I’ve positively I.D.ed the tires/wheels on the new Afterlife RTV. Amazon link provided below! [image] [image] [image] [image] <a href="https://www.amazon.com/Goolsky-AX-3011-Monster-Beadlock-TRAXXAS/dp/B06XS6V7T9/ref=sr_1_1?dchild=1&keywords=goolsky+austar+ax-3011&qid=1627529017&sr=8-1" class="onebox" target="_blank" rel="noopener">https://www.amazon.com/Goolsky-AX-3011-Monster-Beadlock-TRAXXAS/dp/B06XS6V7T9/ref=sr_1_1?dchild=1&keywords=goolsky+austar+ax-3011&qid=1627529017&sr=8-1</a>
Read moreStarted a forum topic: Ghostbusters: Afterlife Proton Pack Build
Some of you may remember my previous build thread from about a year ago that I asked to be removed. I finished my pack not long after that. Here’s some recent photos: [image] [image] [image] Got it pretty close! I have already gone and made a few adjustments to it since the official photo drop…
Read moreStarted a forum topic: Phoebe Shoes I.D.ed
I have been meaning to post this for a while, just keep forgetting. I have I.D.ed Phoebe’s red shoes she wears with her gray overalls. [image] <a href="https://billyfootwear.com/products/womens-billy-classic-lace-high-red-white-canvas-zip?variant=14833661870115" class="onebox" target="_blank" rel="noopener">https://billyfootwear.com/products/womens-billy-classic-lace-high-red-white-canvas-zip?variant=14833661870115</a> [image]
Read moreStarted a forum topic: The Ultimate Holtzmann Thread
For those of you that don’t know, I started a Holtzmann builders group on Facebook a month or so ago. I and others have identified a lot of her stuff, so I figured it was time to post it over here. First up, her lab coat: [image] It is manufactured by BDG, “Rugged Indigo Duster”. Sold through Urb…
Read moreSign in to reply.
Started a forum topic: INT - Resin Cast Feigbusters Shin Guards
Seeing if anyone would be interested in resin casts of the shin guards for the remake suits. They will be cast in Soooth-On 65D Semi Rigid resin with black pigment. [image] Price is $40 + $12.65 USPS Priority Shipping in the US. International orders, please PM for shipping rates. I’ll start with …
Read moreStarted a forum topic: Feig Gloves Identified
Fourth Element 3mm Neoprene Diving Gloves [image] [image] [image] [image] Obviously modified.
Read moreSign in to reply.
Sign in to reply.
Sign in to reply.
Sign in to reply.
Sign in to reply.
Sign in to reply.
<BR />
<BR />I love Ecto Clean! it\'s the real anti-Slime !
Sign in to reply.
Sign in to reply.