I’m currently doing some research on the Ecto in preperation to start detailing Eaglemoss’s 1/8 Scale Ecto and some of the interior parts are just so wrong or just plain bad.
One of these is the rear shelf containing the Polynoid and the switches. Looking through the Haynes manual they have the swi…
Apologies if this is old news, but I’ve not seen it around on here. There are some great reference pictures of the original GB1 Hero Trap (I assume it was the one that was recently auctioned) on Propbay. Quite nice to see some of the lesser seen details properly.
<a href="http://www.propbay.com/original/ghostbusters-hero-ghost-trap-ghostbusters-1984-movie-prop-2440.html" class="onebox" target="_blank" rel="noopener">http://www.propbay.com/original/gho…</a>
Hey guys,
After finding an awesome photo from <a href="http://invasioncolchester.co.uk/">Invasion Colchester</a>, I decided to have a little play around in Photoshop. Unfortunately I could only get of the source photo from Facebook so was unable to get a decent high quality JPG, so its a bit on the small side. It is also a bit rushed in places …
I came to mounting my pack lights earlier this evening and I used some metal PCB spacers to attach it to my shell. When I turned the power on to the lights, all the Power cell lights were all dimly lit and static. I then figured it might have been because of a piece of solder near the mounting point…
Well it has been a long time coming (23 years in fact), but I am finally going to be joining the ‘Proton Pack Owners Club’. With the arrival of DL4567’s shell this week and Proptronix’s light kit, it was about time to get started.
My current list of pieces I have are:
DL4567 Shell + Mobo
ALICE pa…
So whilst starting to build my thrower I started looking at some ref pics, as well as skip through the blu-ray pausing every so often. One of the things that initially struck me prior to watching the movie was the following screen capture:
[image]
If you notice both Ray and Winston’s thrower are l…
Hey guys,
Whilst I understand the majority of you guys will not have a clue what i’m talking about I figure there is a slim chance some of you will remember.
When I was younger I used to go on family holidays to Great Yarmouth (a seaside town in the UK), I remember they had a ‘Ghostbusters Firehou…
Hey guys,
Figured I would post some pics of the current progress I have made of Irricanian’s trap kit. Unfortunatly there arn’t loads of progress pics but I will try to desribe as best as I can.
Firstly once I got the kit unpacked what else was there to do than to cautiously balance everything tog…
Hey Guys,
Been here for a while and figured I should post some pics of my outfit!
I started it back in about February, and got the main suit ‘finished’ for the game release. I believe it is a Nomex CWU 27/P Flight Suit (could someone confirm this please?) which I managed to secure on eBay for abou…
Was walking through Derby Westfield shopping centre today during a lunchbreak and I noticed that familar sight of the GB logo in a display cabinet. Turns out it was displaying some new T-Shirts from FCUK.
Had a look on the website and they seem to have about 5 different shirts, most of which I have…
Sign in to post on neo_virus's wall.
https://www.facebook.com/greatyarmouthphotosandwebcams/posts/pfbid02gzyD41XBmSvYm2gih2cvRcTjXxYNTscUmustgcdDnpBxQTWhafh7tJX3Eai3P122l
Sign in to reply.
Started a forum topic: Some of the rear shelf electronics possibly identified as MSC Eaton Light Switches?
I’m currently doing some research on the Ecto in preperation to start detailing Eaglemoss’s 1/8 Scale Ecto and some of the interior parts are just so wrong or just plain bad. One of these is the rear shelf containing the Polynoid and the switches. Looking through the Haynes manual they have the swi…
Read moreSign in to reply.
Started a forum topic: Pictures of the GB1 Hero Trap on Propbay
Apologies if this is old news, but I’ve not seen it around on here. There are some great reference pictures of the original GB1 Hero Trap (I assume it was the one that was recently auctioned) on Propbay. Quite nice to see some of the lesser seen details properly. <a href="http://www.propbay.com/original/ghostbusters-hero-ghost-trap-ghostbusters-1984-movie-prop-2440.html" class="onebox" target="_blank" rel="noopener">http://www.propbay.com/original/gho…</a>
Read moreStarted a forum topic: The UK Ghostbusters poster.
Hey guys, After finding an awesome photo from <a href="http://invasioncolchester.co.uk/">Invasion Colchester</a>, I decided to have a little play around in Photoshop. Unfortunately I could only get of the source photo from Facebook so was unable to get a decent high quality JPG, so its a bit on the small side. It is also a bit rushed in places …
Read moreStarted a forum topic: Anybody know what's happened to my Proptronix Pack Lights?
I came to mounting my pack lights earlier this evening and I used some metal PCB spacers to attach it to my shell. When I turned the power on to the lights, all the Power cell lights were all dimly lit and static. I then figured it might have been because of a piece of solder near the mounting point…
Read moreStarted a forum topic: Max Power's Pack & Wand Build (Updated 10th May)
Well it has been a long time coming (23 years in fact), but I am finally going to be joining the ‘Proton Pack Owners Club’. With the arrival of DL4567’s shell this week and Proptronix’s light kit, it was about time to get started. My current list of pieces I have are: DL4567 Shell + Mobo ALICE pa…
Read moreStarted a forum topic: GB1 packs didn't have a rear instrument bar cover?
So whilst starting to build my thrower I started looking at some ref pics, as well as skip through the blu-ray pausing every so often. One of the things that initially struck me prior to watching the movie was the following screen capture: [image] If you notice both Ray and Winston’s thrower are l…
Read moreStarted a forum topic: Ghostbuster's Firehouse attraction in Great Yarmouth (UK)
Hey guys, Whilst I understand the majority of you guys will not have a clue what i’m talking about I figure there is a slim chance some of you will remember. When I was younger I used to go on family holidays to Great Yarmouth (a seaside town in the UK), I remember they had a ‘Ghostbusters Firehou…
Read moreStarted a forum topic: Building Irricanian's resin Trap kit.
Hey guys, Figured I would post some pics of the current progress I have made of Irricanian’s trap kit. Unfortunatly there arn’t loads of progress pics but I will try to desribe as best as I can. Firstly once I got the kit unpacked what else was there to do than to cautiously balance everything tog…
Read moreStarted a forum topic: Progress of GB uniform (Lots of pics)
Hey Guys, Been here for a while and figured I should post some pics of my outfit! I started it back in about February, and got the main suit ‘finished’ for the game release. I believe it is a Nomex CWU 27/P Flight Suit (could someone confirm this please?) which I managed to secure on eBay for abou…
Read moreStarted a forum topic: New Ghostbusters T-Shirts found.
Was walking through Derby Westfield shopping centre today during a lunchbreak and I noticed that familar sight of the GB logo in a display cabinet. Turns out it was displaying some new T-Shirts from FCUK. Had a look on the website and they seem to have about 5 different shirts, most of which I have…
Read more