As the title says, maybe anyone who owns a Legris Gen1 4mm elbow would chime in for some questions on measurements? Contact via PM also if you wish to do so.
I again state that I do not want to buy one, this is just to start a project and do some first tryouts so I need specific measurements of the…
Hannes Pressler
Vienna / Austria
250 USD (obo)
CPU64 Aluminum thrower body including pictured parts
Hi,
I’ve sold my pack some time ago and I didn’t include the thrower in the sale because I thought I’ll use it along with a new pack in the future but it’s time to let it go now.
It is…
-Hannes Pressler
-Vienna / Austria
-150 (obo) EUR
-Corcoran side zip jump boots size 9.0 D (US)
I bought them on ebay somewhere between 2017 and 2018. Came in the condition you see on the pics. No defects. The flaps over the zippers were cut off.
Wore them once on Vienna Comic Con 2018 and neve…
first of all: please forgive my bad english.
I recently looked at the - now auctioned - Egon Spengler boots and did some research.
What catched my eye:
1 - the boots do have a brown hue in some areas. This - in my opinion - is present on the boots and is not an issue of lighting.
2 - the boots d…
hi folks,
Name: Hannes Pressler
Country: AUSTRIA
ZIP: 2202
up for sale is my stunt lineage shell including:
aluminum mobo
lineage grips cast in resin
lineage bumber cast in resin
These were sold in a seperate thread from machina28 here…I was one of the buyers (Hannes Pressler).
The …
Not much to say here…
Name: Hannes Pressler
Country: Austria
ZIP: 2202
I‘ll ship worldwide.
Sold per foot, 20 USD (s&h not included).
For now I only have the red tubing so please don‘t ask for other colors. Yes it is 3814-1 (not a -7…sry for the crappy pics).
[image]
[image]
Regards
Hi
to make it short: I had no luck finding vintage gen1 Legris elbows and resin copies seem as hard to find.
Since I don‘t want to go with alternatives (smaller ones or gen2 or SMC‘s) I thought I‘ll try replicating some myself - just for the fun of it.
I would need the following dimensions in mm,…
Hi fellow Ghostheads…
Halloween is coming close and I‘m frustrated with finding a correct sized flight suit.
I am exactly 5.10 and 182 lbs.
What I have here:
Truspec 38R
Truspec 36S
Carter Industries (?) 38R.
Truspec 38R:
inseam much too long, can‘t remember the rest. Have to try it …
Name: Hannes Pressler
Country: Austria
City / ZIP: Koenigsbrunn, 2202
Up for sale are four ITT RM833212 relays, the real thing.
[image]
I‘ll include an Octal 11 pin socket for free on each. The four relays are sold seperately but if anyone want‘s all four - no problem.
Price: 60 USD for one re…
Hi
perhaps this isn‘t new, I didn‘t do research if someone else had the same idea.
Real Legris straight connectors (part number 3175 04 10) are hard to come by these days.
The average builder / collector - like me - can get some decent replicas or do an endless search for the real deal. I think I…
Sign in to post on torwen's wall.
Started a forum topic: Vintage GEN1 Legris 4mm elbows - owners please chime in (this is NO wtb thread!)
As the title says, maybe anyone who owns a Legris Gen1 4mm elbow would chime in for some questions on measurements? Contact via PM also if you wish to do so. I again state that I do not want to buy one, this is just to start a project and do some first tryouts so I need specific measurements of the…
Read moreStarted a forum topic: All Aluminum thrower (CPU64)
Hannes Pressler Vienna / Austria 250 USD (obo) CPU64 Aluminum thrower body including pictured parts Hi, I’ve sold my pack some time ago and I didn’t include the thrower in the sale because I thought I’ll use it along with a new pack in the future but it’s time to let it go now. It is…
Read moreStarted a forum topic: Corcoran side zip boots for sale
-Hannes Pressler -Vienna / Austria -150 (obo) EUR -Corcoran side zip jump boots size 9.0 D (US) I bought them on ebay somewhere between 2017 and 2018. Came in the condition you see on the pics. No defects. The flaps over the zippers were cut off. Wore them once on Vienna Comic Con 2018 and neve…
Read moreStarted a forum topic: Egon Spengler's boots - tracking down the original model used in the 1984 movie.
first of all: please forgive my bad english. I recently looked at the - now auctioned - Egon Spengler boots and did some research. What catched my eye: 1 - the boots do have a brown hue in some areas. This - in my opinion - is present on the boots and is not an issue of lighting. 2 - the boots d…
Read moreStarted a forum topic: stunt lineage shell for sale
hi folks, Name: Hannes Pressler Country: AUSTRIA ZIP: 2202 up for sale is my stunt lineage shell including: aluminum mobo lineage grips cast in resin lineage bumber cast in resin These were sold in a seperate thread from machina28 here…I was one of the buyers (Hannes Pressler). The …
Read moreStarted a forum topic: FS: genuine clippard 3814-1 red tubing
Not much to say here… Name: Hannes Pressler Country: Austria ZIP: 2202 I‘ll ship worldwide. Sold per foot, 20 USD (s&h not included). For now I only have the red tubing so please don‘t ask for other colors. Yes it is 3814-1 (not a -7…sry for the crappy pics). [image] [image] Regards
Read moreStarted a forum topic: Legris Gen1 elbow dimensions needed - sketch in thread
Hi to make it short: I had no luck finding vintage gen1 Legris elbows and resin copies seem as hard to find. Since I don‘t want to go with alternatives (smaller ones or gen2 or SMC‘s) I thought I‘ll try replicating some myself - just for the fun of it. I would need the following dimensions in mm,…
Read moreStarted a forum topic: help / input on flightsuit needed
Hi fellow Ghostheads… Halloween is coming close and I‘m frustrated with finding a correct sized flight suit. I am exactly 5.10 and 182 lbs. What I have here: Truspec 38R Truspec 36S Carter Industries (?) 38R. Truspec 38R: inseam much too long, can‘t remember the rest. Have to try it …
Read moreStarted a forum topic: FS: real vintage ITT relays
Name: Hannes Pressler Country: Austria City / ZIP: Koenigsbrunn, 2202 Up for sale are four ITT RM833212 relays, the real thing. [image] I‘ll include an Octal 11 pin socket for free on each. The four relays are sold seperately but if anyone want‘s all four - no problem. Price: 60 USD for one re…
Read moreStarted a forum topic: How to: make your own Legris straight connectors
Hi perhaps this isn‘t new, I didn‘t do research if someone else had the same idea. Real Legris straight connectors (part number 3175 04 10) are hard to come by these days. The average builder / collector - like me - can get some decent replicas or do an endless search for the real deal. I think I…
Read more