It seems like the real MT500s are getting more and more hard to find. I started the process of pulling dimensions of a buddy’s radio so I’ll be able to print copies.
Are there any features that you’d like included in a printed version?
It should be possible to make a hollow one that an ambitious …
It seems like the real MT500s are getting more and more hard to find. I started the process of pulling dimensions of a buddy’s radio so I’ll be able to print copies.
Are there any features that you’d like included in a printed version?
It should be possible to make a hollow one that an ambitious …
Another one of the projects I’ve been working on was to build a couple traps. Initially, I stated to work with plywood, and later added some 3D printed components for some of the more complex/intricate pieces.
[image]
[image]
[image]
[image]
Another one of the projects I’ve been working on was to build a couple traps. Initially, I stated to work with plywood, and later added some 3D printed components for some of the more complex/intricate pieces.
[image]
[image]
[image]
[image]
I’ve teased with a few parts on here before, and I decided to rebuild my current <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">slime blower</a> using my printed parts. I still have a ways to go, but wanted a place to document my progress.
Slime Blower gun:
started with the nose cone. I wanted this to be once piece, but the size of the piece rel…
I’ve teased with a few parts on here before, and I decided to rebuild my current <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">slime blower</a> using my printed parts. I still have a ways to go, but wanted a place to document my progress.
Slime Blower gun:
started with the nose cone. I wanted this to be once piece, but the size of the piece rel…
I wanted to use my printer to make a set of <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">ecto goggles</a>, so I had to start modeling. used the dimensions on the equipment build plans for the lenses, and the frame, I played around with until they looked right (later compared to matty goggles)
Because my current printer only has a build volume…
I wanted to use my printer to make a set of <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">ecto goggles</a>, so I had to start modeling. used the dimensions on the equipment build plans for the lenses, and the frame, I played around with until they looked right (later compared to matty goggles)
Because my current printer only has a build volume…
I’m bought a 3D printer, and modeled up the parts for the tank kit accessories for the <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">Slime Blower</a>. Here’s my first print, the tank-barrel halves
Eventually, I plan on selling the pieces needed for a Slime Blower Build, if there is interest
-Wildcard
I’m bought a 3D printer, and modeled up the parts for the tank kit accessories for the <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">Slime Blower</a>. Here’s my first print, the tank-barrel halves
Eventually, I plan on selling the pieces needed for a Slime Blower Build, if there is interest
-Wildcard
Sign in to post on Wildcard's wall.
Started a forum topic: Motorola MT500 radio
It seems like the real MT500s are getting more and more hard to find. I started the process of pulling dimensions of a buddy’s radio so I’ll be able to print copies. Are there any features that you’d like included in a printed version? It should be possible to make a hollow one that an ambitious …
Read moreStarted a forum topic: Motorola MT500 radio
It seems like the real MT500s are getting more and more hard to find. I started the process of pulling dimensions of a buddy’s radio so I’ll be able to print copies. Are there any features that you’d like included in a printed version? It should be possible to make a hollow one that an ambitious …
Read moreStarted a forum topic: 3D printed/Plywood Trap
Another one of the projects I’ve been working on was to build a couple traps. Initially, I stated to work with plywood, and later added some 3D printed components for some of the more complex/intricate pieces. [image] [image] [image] [image]
Read moreStarted a forum topic: 3D printed/Plywood Trap
Another one of the projects I’ve been working on was to build a couple traps. Initially, I stated to work with plywood, and later added some 3D printed components for some of the more complex/intricate pieces. [image] [image] [image] [image]
Read moreStarted a forum topic: Wildcard 3D Printed Slime Blower Build
I’ve teased with a few parts on here before, and I decided to rebuild my current <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">slime blower</a> using my printed parts. I still have a ways to go, but wanted a place to document my progress. Slime Blower gun: started with the nose cone. I wanted this to be once piece, but the size of the piece rel…
Read moreStarted a forum topic: Wildcard 3D Printed Slime Blower Build
I’ve teased with a few parts on here before, and I decided to rebuild my current <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">slime blower</a> using my printed parts. I still have a ways to go, but wanted a place to document my progress. Slime Blower gun: started with the nose cone. I wanted this to be once piece, but the size of the piece rel…
Read moreStarted a forum topic: Wildcard's Ecto Goggles build
I wanted to use my printer to make a set of <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">ecto goggles</a>, so I had to start modeling. used the dimensions on the equipment build plans for the lenses, and the frame, I played around with until they looked right (later compared to matty goggles) Because my current printer only has a build volume…
Read moreStarted a forum topic: Wildcard's Ecto Goggles build
I wanted to use my printer to make a set of <a href="https://www.gbfans.com/shop/mattel-ecto-goggles" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="ecto goggles" data-autolink-id="398">ecto goggles</a>, so I had to start modeling. used the dimensions on the equipment build plans for the lenses, and the frame, I played around with until they looked right (later compared to matty goggles) Because my current printer only has a build volume…
Read moreStarted a forum topic: Tank Kit Parts - without having to buy the tank kit!
I’m bought a 3D printer, and modeled up the parts for the tank kit accessories for the <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">Slime Blower</a>. Here’s my first print, the tank-barrel halves Eventually, I plan on selling the pieces needed for a Slime Blower Build, if there is interest -Wildcard
Read moreStarted a forum topic: Tank Kit Parts - without having to buy the tank kit!
I’m bought a 3D printer, and modeled up the parts for the tank kit accessories for the <a href="https://www.gbfans.com/wiki/equipment/slime-blower" class="sitemap-autolink sitemap-autolink-content" data-sitemap-autolink="true" data-autolink-type="content" data-autolink-term="slime blower" data-autolink-id="3393">Slime Blower</a>. Here’s my first print, the tank-barrel halves Eventually, I plan on selling the pieces needed for a Slime Blower Build, if there is interest -Wildcard
Read more